Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
Initialising ...
; ; ; ; ; *; *
JNC TN8400 2001-026, 29 Pages, 2001/12
The measurement condition by spectrophotometry was evaluated to measure Np content in MOX fuel containing Np. The Np concentration was obtained by measuring the 727nm absorption peak, after the valence of Np in the sample solution was adjusted to the Np(Ⅳ). The calibration curve showed the linearity up to Np concentration 0.8mg/ml. Though Pu and U quantity were respectively added to the Np solution to 30 times and 60 times of Np concentration, there was no effect to the Np analysis. By using this method, relative standard deviation (RSD) of the analyzed values of Np content for 2%Np - MOX fuel was about 4%. In addition, It was confirmed that the Np content could be measured without separating Np from Pu and U. This method can be sufficiently applied as a quick simple method to analyze Np content in MOX fuel containing Np.
Fujii, Toshiyuki*; *
JNC TJ9400 2000-003, 36 Pages, 2000/02
For establishing a recycling system based on low-decontamination, the distribution behaviors of radionuclides in the process are essential information for the design of the system. Molybdenum and palladium are less radioactive fission products, but attention should be paid to them because they are likely to extremely affect the performance of the recycled fuels. In this context, in this study, the extraction behaviors of molybdenum and palladium under conditions of PUREX and TRUEX extraction process were experimentally studied, and their chemical mechanisms were discussed. In cojunction with the extraction experiments, absorption spectrometry was applied to identify the related species and the extraction mechanism. As a result, knowledge for the distribution characteristics of molybdenum and palladium in PUREX and TRUEX process was reinforced.
Kato, Toshihiro*; ; ; ; Ishibashi, Yuzo; Takeda, Seiichiro
PNC TN8410 98-070, 31 Pages, 1998/02
None